Basket strainer wrench – The waste basket, also known as a filter basket, is usually located in a sink sink hole. Meals for filtering foreign ingredients such as food waste, hair, or other solid substances are large enough to cause blockages in the bathroom or drainage pipes. This may be damaged or rusted over time, and can eventually leak. When this happens, you need to replace it with the new one. It does not take much time to install a new filter basket and in fact, you can do it yourself without the help of a professional plumber.
The materials and tools you need for the installation are new absorbent baskets, install a basket filter, a pair of water pumps, a sweeper and a knife putty. After you’ve collected all of these items, you just have to follow the mobile DIY step by step sink installation guide below. Start by loosening the slip nut that connects the drain pipes to the bottom of the basket. You can do this with empty hands. However, if the slip nut does not move, you must use the water pump. After loosening, release it from the end of the pipe.
Next, turn the drain pipe to the side. After that, remove the nut nut which connects the basket unit to the sink by installing the basket filter. Located at the bottom of the sink. Once the key nut is removed, remove the basket unit from the sink and scrape the putty putty left using a putty knife. Apply putty plugs to the bottom of the new drainage mouth. Lips are the part located in the sink. Place a new basket in the drain hole and apply pressure.