Pond air pump – A pond can be a serene addition to your outdoor living space, and a home for plants and even fish during the seasonal months. The one that a simple swimming pool or a more complex construction with a cascade, the central aspect of a pond is that the water continues moving and the filter. Without a work pump, this most important feature is lost. Checking and repairing your pond air pump cannot be as difficult as you think, and that could be a simple solution and is not cause for panic after all.
Disconnect the power supply to the pump so that there is no risk of electric shock while the pump is being examined. While the pump is disconnected, check the power source to make sure it is connected and working by connecting another device or accessory to the socket. Just press the reset button on the board of the socket and retest the socket. If the energy is present, re-connect the pump and check to see if it starts working. If not, disconnect again.
Look at the area where the pump is located. Check if the pump is completely immersed in the water. If part of the pump is exposed, it will not work properly. The pond pump is designed to be completely immersed; if it stays dry, it can overheat. If this is the case, submerge the pump completely, plug it in and see if it starts working.