When fencing is on a simple, continuous slope with no small dips and rises, only fitting to the installing a chain link fence occurs at the ends of the chain link fabric where it attaches to the terminal or corner post. The position must always be installed upright. Since this would cause the end of the fabric to meet the position at an angle, the fabric should be slanted and the tension bar that puts fabric to write slid through the mask parallel to the terminal insert.
To drive chain link fences on terraced terrain, place a terminal position close to the bottom of each patio step. Measure the height of the terrace steps plus the height of the chain link and leave as much of the post exposed over the ground. Attach the fence runs along the high part of the terrace to the top of the post and fences run along the low part of the terrace to the bottom of the post.
proper placement of the poles and the use of bias cut at the end of a fence run allows installation of chain link fences on most types of terrain, fact is that chain link looks best when the top of the fence is level and uniform along the length of the run. On uneven terrain where aesthetics are a consideration, alternative forms of fence such as wood privacy fences can be a better solution.