Welded Wire Fence Home Depot – A welded wire fence provides a sturdy barrier to keep pets or children within a designated area of their property. This enclosure is presented in several heights. The fenced plastic covered soldier is also possible, which makes it protected if children come in touch with the metal ends of the fence. Because the fence mesh is welded at the crossing points to give the rigidity of fencing, a welded wire fence installation requires less bracing and the stretching of the traditional fencing of woven wire. Thinner gauge, welded wire fence material, while it comes in high-strength welded fencing rolls is available in 16-foot-long panels.
Mark where you will install the wire fence welded with stakes and ropes. Make holes of the corner push or end messages with a pair of hand hole punch diggers. The holes should be below the ice line to keep the stands from rising from the ground during seasonal changes. Shovel 2 to 3 inches of gravel at the bottom of the back hole for drainage. Mix fast solidification according to the instructions of the package. Set a post in the hole and hold a carpenter level against it to get it up and down, or plumb. Put the concrete around the pole in the hole.
Adjust the other posts in the corners in a similar manner. If you are building a door in your fence, you need solid wooden posts too. Place one end of the welded wire to one of the corner posts with fencing staples. Unroll the fence at the other end of the fence line. Pull tight and attach the fence to the other corner post with fencing staples.