Install chain link fence – Growing up in the country, my family kept us roaming children with a wire fence. It may not have been as decorative as some of the more design ones out there, but it was simple and safety. I have many memories of climbing and, finally, jumping over the fence and the good news is that it is actually easy to install, with a little planning. A wire fence is made up of three main elements: messages, wire rolls, and doors. The first step is to plan the design of your fence.
This includes not only the chain link fence post spacing chart where the primary corners are but also the place where you will put the doors. The corner posts and the door are commonly called terminal posts. Place a stake on the ground, where each of the terminal posts belongs. You can use this as a guide. The corner posts are easy to plan, the door posts require a little extra work. Measure the width of the barrier and place a mark on each side.
One position will hold the door and the other will have the latch to close. Using a digging hole post, dig about 30 inches deep and at least 8 inches wide for each chain link fence post depth. Center each station and pour it into the concrete until it reaches ground level. Use a spatula to smooth out. It is important that the messages are centered and straight.